Jeladó - EtherCAT 10/100Mbit, 13bit, 10-30VDC, teng.10mm, csatl. M12 4 tűs IP66
Jeladó - EtherCAT 10/100Mbit, 13bit, 10-30VDC, teng.10mm, csatl. M12 4 tűs IP66
356 890 Ft
Nettó ár: 281 016 Ft
- Készlet: Raktáron
- Cikkszám: OCD-EC00B-1213-C10S-PRM
IXARC abszolút forgó optikai jeladó
Jeladó - EtherCAT 10/100Mbit, 13bit, 10-30VDC, teng.10mm, csatl. M12 4 tűs IP66
OCD-EC00B-1213-C10S-PRM
Termékadatlap:
https://www.posital.com/en/products/absolute-encoders/absolute-encoder-finder/OCD-EC00B-1213-C10S-PRM/114183401/detail.php
Adatok
Interface | |
Interface | Ethercat |
Profile | CoE (CANopen over EtherCAT, DS-301+DS-406) |
Diagnostics | OptoAsic, Memory, LED |
Features | Boot-Loader, Round Axis |
Transmission Rate | 10 / 100 Mbit |
Interface Cycle Time | ? 62.5 µs |
Programming Functions | Resolution, preset, counting direction |
Outputs | |
Output Driver | Ethernet |
Electrical Data | |
Supply Voltage | 10 – 30 VDC |
Current Consumption | ? 230 mA @ 10 V DC, ? 100 mA @ 24 V DC |
Power Consumption | ? 2.5 W |
Start-Up Time | < 1 s |
Reverse Polarity Protection | Yes |
Short Circuit Protection | Yes |
EMC: Emitted Interference | DIN EN 61000-6-4 |
EMC: Noise Immunity | DIN EN 61000-6-2 |
Electrical Lifetime | >105 h |
Sensor | |
Technology | Optical |
Resolution Singleturn | 13 bit |
Resolution Multiturn | 12 bit |
Multiturn Technology | Mechanical Gearing (no Battery) |
Accuracy (INL) | ±0.0220° (14 – 16 bit), ±0.0439° (?13 bit) |
Code | Binary |
Environmental Specifications | |
Protection Class (Shaft) | IP66/IP67 |
Protection Class (Housing) | IP66/IP67 |
Operating Temperature | -40 °C (-40 °F) - +85 °C (+185 °F) |
Storage Temperature | -40 °C (-40 °F) – +85 °C (+185 °F) |
Humidity | 98% RH, no condensation |
Mechanical Data | |
Housing Material | Steel |
Housing Coating | Wet coating (RAL 9006 White Aluminium) + Cathodic corrosion protection (>720 h salt spay resistance) |
Flange Type | Clamp, o 58 mm (C) |
Flange Material | Aluminum |
Shaft Type | Solid, Single Flat, Length = 20 mm |
Shaft Diameter | o 10 mm (0.39") |
Shaft Material | Stainless Steel V2A (1.4305, 303) |
Max. Shaft Load | Axial 40 N, Radial 110 N |
Minimum Mechanical Lifetime (10^8 revolutions with Fa/Fr) | 430 (20 N / 40 N), 150 (40 N / 60 N), 100 (40 N / 80 N), 55 (40 N / 110 N) |
Rotor Inertia | ? 30 gcm2 [? 0.17 oz-in2] |
Friction Torque | ? 5 Ncm @ 20 °C, (7.1 oz-in @ 68 °F) |
Max. Permissible Mechanical Speed | ? 3000 1/min |
Shock Resistance | ? 100 g (half sine 6 ms, EN 60068-2-27) |
Permanent Shock Resistance | ? 10 g (half sine 16 ms, EN 60068-2-29) |
Vibration Resistance | ? 20 g (20 Hz – 2000 Hz, EN 60068-2-6) |
Length | 80 mm (3.15") |
Weight | 375 g (0.83 lb) |
Electrical Connection | |
Connection Orientation | Radial |
Connector 1 | M12, Female, 4 pin, d coded |
Connector 2 | M12, Male, 4 pin, a coded |
Connector 3 | M12, Female, 4 pin, d coded |
Product Life Cycle | |
Product Life Cycle | Established |
Approval | CE |
Connection Plan | ||
SIGNAL | CONNECTOR | PIN NUMBER |
Tx+ | Connector 1 | 1 |
Rx+ | Connector 1 | 2 |
Tx- | Connector 1 | 3 |
Rx- | Connector 1 | 4 |
Power Supply | Connector 2 | 1 |
Not Connected | Connector 2 | 2 |
GND | Connector 2 | 3 |
Not Connected | Connector 2 | 4 |
Tx+ | Connector 3 | 1 |
Rx+ | Connector 3 | 2 |
Tx- | Connector 3 | 3 |
Rx- | Connector 3 | 4 |
Connector-View on Encoder
Dimensional Drawing